3D Printing of dive parts in a water proof nylon plastic.  Perfect for handling parts you need urgently that are out of stock.
Price is per hour of print.   State colour on order: Black and White are available.

For existing customers, we offer an example of this service we offer the thruster set shown in the image: ideal for effortless diving.  Supplied as a pair of shells, White & Black, with a set of rotors, a CAN adapter and the cables for just one hour of print time, subject to any development performed on this, remaining with Open Safety as the design owner.  This replaces the shell and rotors of your existing rebreather thruster.

Comprehensive technician pack including tools and spares for Open Safety rebreathers

Includes full O-ring and lip-seal set described in datasheet, all flapper valves, diaphrams, and hard plastic parts that are recommended as spares if travelling to remote regions.   The kit also includes all tools and lubricants.

The spare parts kit includes:
One of each type of O-ring with a waterproof 1:1 O-ring chart.
Counterlung repair patch
Two C Clips for the ALVBOV Tubes
One of each type of Mushroom valve
Virkon, 10 tabs
Spare center pin for the EAC
Spare EAC Seal
Spare elastomer mouthpiece and cable tie
Screws for oxygen cell holder
One nut and one bolt for harness
O-ring pick
ALVBOV Faceplate
Jubilee clip covers
Gleitmo 599 and Tribolube 71
Spare parts storage container

Tools:
Specialist A-320 pin spanner and C-spanner
Pressure gauge: intermediate pressure
Seat adjustment tool
Allen key set
Inspection light, UV for O2 field clean check

Comprehensive expedition level spares and repair kit for Apocalypse Type IV rebreathers.

Includes full O-ring and lip-seal set described in datasheet, all flapper valves, diaphrams, and hard plastic parts that are recommended as spares if travelling to remote regions.   The kit also includes all tools and lubricants.

The spare parts kit includes:
One of each type of O-ring with a waterproof 1:1 O-ring chart.
Counterlung repair patch
Two C Clips for the ALVBOV Tubes
One of each type of Mushroom valve
Virkon, 10 tabs
Spare center pin for the EAC
Spare EAC Seal
Spare elastomer mouthpiece and cable tie
Screws for oxygen cell holder
One nut and one bolt for harness
O-ring pick
ALVBOV Faceplate
Jubilee clip covers
Gleitmo 599 and Tribolube 71
Spare parts storage container

 HUD Mounting Clip, for NA90 HUDs.

Breathing Manifold for Apocalypse Type II including caps and inserts.

Retooled in 2012, this fits post 2012 twin scrubber rebreathers only.  A retro-kit is available for earlier models.

Replacement manual oxygen injector, providing quiescent Constant Mass Flow at 0.7 lpm through a sapphire orifice, increasing to 16 to 20lpm when button is pressed.

Features tactile feedback of gas being connected, audible feedback of the high flow rate setting, coaxial gas hoses with failure flow limit, and automatic orifice cleaning.

 Replacement CO2 Pod for iCCR.

Replacement PPO2 Pod with integral display, for Apocalypse Type IV iCCR

Apocalypse Type IV eCCR moulding set from the OSEL Incursion-BM rebreather, to enable fitment of eCCR electronics for PPO2 control. This part replaces the dumb top cap on the scrubber of the Apocalypse Type IV CCR and requires relocation of the integrated 4kg weight.

Supplied to OEMs with professional machining capabilities who wish to offer a state of the art eCCR in markets not served by OSEL: OSEL offer eCCRs only in the military and commercial diving markets.

This set comprises of just the mouldings, no machining, comprising the head, O-rings, sensor card holder and circlips, along with documentation covering the connector machining.

As supplied, this set of component parts is undiveable and requires accurate machining to fit PPO2 cabling and electronics to the Apocalypse Type IV CCR.

The first stage regulator is a high quality pressure compensated diaphragm SCUBA regulator having either G5/8 300 bar (A-320 NITROX model) or M26 300 bar inlet (A-320 CMF model), and two mirrored output port faces, each having three ports: one pressure outlets and two low pressure outlets. Outlets are standard SCUBA threads: 5/16” UNF for the high pressure port and 3/8” UNF for the low pressure port.
A feature of the design is it is very compact and light weight, offering very high breathing performance.

The lubricant used is Gleitmo 599, which has an oxygen surge auto-ignition pressure exceeding 450 bar.
When the A-320 first stage is used with the Deep Life ALVBOV, the performance of the valve meets the requirements of EN 250. The A-320 was not deleterious to the performance of any 2nd stage regulator (DSV) it was tested with compared with their native first stage. The A-320 has a novel flow adaptive pressure compensation which gets the maximum performance out of the second stage.
The A-320 regulator has been widely used in Asia for more than ten years without incident relating to the first stage regulator.

Samples of the regulator were supplied to BAM and a sample has been subject to oxygen surge testing at BAM (the German Federal Institute for Materials Testing), and passed. There is absolutely no difference to the oxygen compatibility between these two models. The use of G5/8 and M26 threads is determined by the application: air and hypoxic applications use G5/8 and oxygen applications use M26. The CMF model will be supplied only with M26 inlet threads.
The CMF regulator is distinguished by a green cap that is clearly marked “Absolute Pressure Regulator” and “mCCR use only”.

The default Intermediate Pressure (IP) is 11.5bar. The IP can be factory set between 11 and 18bar.

A320 Bucket Filter

Strap Cover (Green) 

Strap Cover (Red) 

 Mushroom D35 (Green)

Mushroom D35 (Red) 

Assy of CCR Canister 

ALVBOV Mouthpiece 

This custom mouthpiece was designed for the ALVBOV to minimise WOB. The custom mouthpiece bite provides the largest mouth opening that can be used without the diver suffering mouth cramp: 8mm at the front of the bite, reducing to 6.2mm at the rear of the bite.

Assy of SRB Inhale Counterlung